how do i sell my soul to The Devil?
- Thread starter Robo Squirrel
- Start date
Basil of Baker Street
Banned
Meditation and mostly just trying to live more with a heart centered awareness.
That is a vague, shytty response. You're gonna have to do better than that doggy
That is a vague, shytty response. You're gonna have to do better than that doggy
HYG friend rep me when you come back
INGREDIENTS
- DMT-containing plant such as Mimosa hostilis root bark
- Water
- Lye (granulated sodium hydroxide)
- Vinegar
- Naptha VM&P (if unavailable, 40-60 Petroleum Ether can be used)
- Personal safety: fume mask, safety goggles and rubber gloves
- Grinder or blender that is capable of crushing ice
- Glass mixing jar – with a wide mouth and tight fitting lid
- Collection jars with lids x4 (glass jelly/jam jars will do)
- Coffee filters
- Rubber spatula
- Freezer
- Pipette
- Eyedropper
- Cut and blend your plant material until it’s as fine as you can get it – wear a mask to avoid breathing in the powder.
- Slowly add your lye to your water a tablespoon at a time, mixing until dissolved, in your mixing jar. For 50g Mimosa hostilis bark, use 750ml water and 50g of lye. NOTE: lye can cause chemical burns and should be treated with care. Neutralise any spills with vinegar. Wear gloves and safety glasses.
- Add your powdered plant to the jar, tightly close the lid, shake thoroughly and then leave for about an hour.
STEP 2: EXTRACTING THE DMT FROM THE BASE SOLUTION
- Add your naptha to the mixing jar: for 50g Mimosa hostilis bark, use 50ml naptha.
- Put the lid back on your mixing jar and gently mix it for about a minute, turning it upside down a few times. Don’t shake it, as this will make it hard to separate out the two layers later.
- Set down your mixing jar and allow the two layers to separate.
- Repeat this gentle agitation a few more times.
- Once the layers have separated after your final agitation, use your pipette to move the top (clear) layer into one of your collection jars. This contains your DMT. Try to avoid taking any of the darker, bottom layer, as this contains nasty stuff you don’t want carried over.
- Add more naptha to the mixing jar and repeat the above steps three more times to get every last remaining bit of DMT out of the base solution.
- Optional – leave the last batch of naptha in the mixing jar for a couple of days to get the maximum amount of DMT from the base solution.
- Put all four of your collection jars (containing DMT in a naptha solution) in the freezer and leave overnight.
STEP 3: EXTRACTING THE DMT FROM THE NAPTHA SOLUTION
- The freezer should have made your DMT crystallise in your collection jars. Pour the solutions through a coffee filter to collect the DMT. The naptha can be saved and reused in future extractions.
- Use your rubber spatula to get every last bit of naptha solution out of the collection jars.
- Carefully lay out your coffee filters to dry. When dried, this DMT powder is ready to smoke, but can be refined further in the optional step below.
(OPTIONAL) STEP 4: RECRYSTALLISATION OF DMT FOR FURTHER REFINEMENT
- Put your DMT powder in a small glass container.
- Put your solvent (either naptha or heptane) in another, separate glass container. You will need about 25ml of solvent for every gram of DMT powder.
- Carefully place both glass containers into a pan of hot water, so their contents start to heat up. NOTE: your solvent will give off flammable fumes, so DO NOT use a gas stove or have open flames around.
- Use an eyedropper to add tiny bits of your hot solvent to the DMT powder. Swirl the glass container around and keep adding solvent until all the DMT is dissolved. Try to use as little solvent as you can get away with.
- Take the pan of water off the heat, and leave it to cool down to room temperature.
- Take the glass container with your dissolved DMT powder, now at room temperature, and put it in the fridge.
- When it has cooled down, move the container into the freezer and leave for a few hours.
- You can now filter out your refined DMT crystal using a coffee filter. This process can be repeated for even greater purity.
The Quick Version
Adapted from Lazyman’s tek on the DMT-nexus
For those of you that don’t like the look of all those steps, and just want to get your DMT out of your plant as quickly as possible (without worrying about purity or yield), here’s a simpler protocol:
INGREDIENTS
- DMT-containing plant such as Mimosa hostilis root bark
- Water
- Lye (granulated sodium hydroxide)
- Vinegar
- Naptha VM&P (if unavailable, 40-60 Petroleum Ether can be used)
- Personal safety: safety goggles and rubber gloves
- Large ceramic mixing bowl (5L)
- Potato masher
- Large measuring jug (2L)
- Large glass baking dish
- Fan
- Break up 400-500g of Mimosa hostilis root bark and put it in a mixing bowl. Make sure the bark only fills half the bowl.
- Slowly add 200g of lye to 2-3L of water. NOTE: lye can cause chemical burns and should be treated with care. Neutralise any spills with vinegar. Wear gloves and safety glasses.
- Add your lye solution into the mixing bowl with the root bark. Wait an hour.
- Use your potato masher to stir and mash up your root bark for 20-30 minutes.
- Pour 250ml of naptha into the bowl and mix for another 20-30 minutes.
- Let the solvent separate out to the top of the mixture for a few minutes.
- Pour the top, clear solvent layer off into your glass baking dish. Avoid getting any of the lower, dark layer in the dish.
- Evaporate the solvent by blowing air from your fan across the baking dish.
- The remaining powder is your smokeable DMT.
All you have to worry about when you make your own DMT is how efficient you’ve been in following the instructions. If you’ve used poor quality ingredients, or done a messy job (i.e. carried over some of the base solution by accident), you may end up with more impurities in your DMT powder. This can be unpleasant to smoke.
There’s a myth that the colour of DMT powder tells you its purity – this isn’t true, as there are a number of factors that contribute to the colour of DMT powder. Generally, if your powder is white, yellow, red or brown, it is safe to smoke. If it is green or blue, something has gone wrong in your extraction and you should try again.
Alternative extraction guides
As mentioned earlier, many extraction protocols use an acid/base extraction method, which we haven’t covered here as the straight-to-base method is a lot simpler. However, if you are interested in being extremely thorough and want to try an acid/base extraction, there is a large selection of guides here on the DMT-nexus.
Safety information
DMT is illegal in most places. I don’t condone breaking the law or using DMT outside a legal and traditional context. If you do decide to take DMT, make sure you research its effects and risks.
DMT is a very powerful psychedelic and should be treated with respect. You should understand how best to prepare for a psychedelic experience, and integrate it afterwards.
Be aware of your dosage! A recommended first-time dose of smoked DMT powder is 15mg.
When following these extraction guides, make sure to understand the process before you start. If you are using a DMT-containing plant other than Mimosa hostilis, make sure you are aware of the differences and adjust your procedure accordingly. Always wear rubber gloves and safety goggles, and a dust mask if you are grinding up plant matter.
If using lye (sodium hydroxide), avoid getting it on your skin, and always wear safety goggles. If you get it on your skin, wash it off with copious amounts of water (and ideally use vinegar too, if it’s within reach, to neutralise the lye). If you get it in your eye, run your eye under tap water for at least 20 minutes and see a doctor. If you spill a large amount, neutralise it with vinegar before cleaning it up. When adding lye to water, add it slowly and mix well.
EDIT: This will also help you stop binge watching gay porn and it will remove other vices from your life.
Last edited:
HYG friend rep me when you come back
INGREDIENTS
EQUIPMENT
- DMT-containing plant such as Mimosa hostilis root bark
- Water
- Lye (granulated sodium hydroxide)
- Vinegar
- Naptha VM&P (if unavailable, 40-60 Petroleum Ether can be used)
STEP 1: EXTRACTING DMT FROM THE PLANT
- Personal safety: fume mask, safety goggles and rubber gloves
- Grinder or blender that is capable of crushing ice
- Glass mixing jar – with a wide mouth and tight fitting lid
- Collection jars with lids x4 (glass jelly/jam jars will do)
- Coffee filters
- Rubber spatula
- Freezer
- Pipette
- Eyedropper
- Cut and blend your plant material until it’s as fine as you can get it – wear a mask to avoid breathing in the powder.
- Slowly add your lye to your water a tablespoon at a time, mixing until dissolved, in your mixing jar. For 50g Mimosa hostilis bark, use 750ml water and 50g of lye. NOTE: lye can cause chemical burns and should be treated with care. Neutralise any spills with vinegar. Wear gloves and safety glasses.
- Add your powdered plant to the jar, tightly close the lid, shake thoroughly and then leave for about an hour.
STEP 2: EXTRACTING THE DMT FROM THE BASE SOLUTION
- Add your naptha to the mixing jar: for 50g Mimosa hostilis bark, use 50ml naptha.
- Put the lid back on your mixing jar and gently mix it for about a minute, turning it upside down a few times. Don’t shake it, as this will make it hard to separate out the two layers later.
- Set down your mixing jar and allow the two layers to separate.
- Repeat this gentle agitation a few more times.
- Once the layers have separated after your final agitation, use your pipette to move the top (clear) layer into one of your collection jars. This contains your DMT. Try to avoid taking any of the darker, bottom layer, as this contains nasty stuff you don’t want carried over.
- Add more naptha to the mixing jar and repeat the above steps three more times to get every last remaining bit of DMT out of the base solution.
- Optional – leave the last batch of naptha in the mixing jar for a couple of days to get the maximum amount of DMT from the base solution.
- Put all four of your collection jars (containing DMT in a naptha solution) in the freezer and leave overnight.
STEP 3: EXTRACTING THE DMT FROM THE NAPTHA SOLUTION
- The freezer should have made your DMT crystallise in your collection jars. Pour the solutions through a coffee filter to collect the DMT. The naptha can be saved and reused in future extractions.
- Use your rubber spatula to get every last bit of naptha solution out of the collection jars.
- Carefully lay out your coffee filters to dry. When dried, this DMT powder is ready to smoke, but can be refined further in the optional step below.
(OPTIONAL) STEP 4: RECRYSTALLISATION OF DMT FOR FURTHER REFINEMENT
- Put your DMT powder in a small glass container.
- Put your solvent (either naptha or heptane) in another, separate glass container. You will need about 25ml of solvent for every gram of DMT powder.
- Carefully place both glass containers into a pan of hot water, so their contents start to heat up. NOTE: your solvent will give off flammable fumes, so DO NOT use a gas stove or have open flames around.
- Use an eyedropper to add tiny bits of your hot solvent to the DMT powder. Swirl the glass container around and keep adding solvent until all the DMT is dissolved. Try to use as little solvent as you can get away with.
- Take the pan of water off the heat, and leave it to cool down to room temperature.
- Take the glass container with your dissolved DMT powder, now at room temperature, and put it in the fridge.
- When it has cooled down, move the container into the freezer and leave for a few hours.
- You can now filter out your refined DMT crystal using a coffee filter. This process can be repeated for even greater purity.
The Quick Version
Adapted from Lazyman’s tek on the DMT-nexus
For those of you that don’t like the look of all those steps, and just want to get your DMT out of your plant as quickly as possible (without worrying about purity or yield), here’s a simpler protocol:
INGREDIENTS
EQUIPMENT
- DMT-containing plant such as Mimosa hostilis root bark
- Water
- Lye (granulated sodium hydroxide)
- Vinegar
- Naptha VM&P (if unavailable, 40-60 Petroleum Ether can be used)
PROCEDURE
- Personal safety: safety goggles and rubber gloves
- Large ceramic mixing bowl (5L)
- Potato masher
- Large measuring jug (2L)
- Large glass baking dish
- Fan
How do I know the purity of my extracted DMT?
- Break up 400-500g of Mimosa hostilis root bark and put it in a mixing bowl. Make sure the bark only fills half the bowl.
- Slowly add 200g of lye to 2-3L of water. NOTE: lye can cause chemical burns and should be treated with care. Neutralise any spills with vinegar. Wear gloves and safety glasses.
- Add your lye solution into the mixing bowl with the root bark. Wait an hour.
- Use your potato masher to stir and mash up your root bark for 20-30 minutes.
- Pour 250ml of naptha into the bowl and mix for another 20-30 minutes.
- Let the solvent separate out to the top of the mixture for a few minutes.
- Pour the top, clear solvent layer off into your glass baking dish. Avoid getting any of the lower, dark layer in the dish.
- Evaporate the solvent by blowing air from your fan across the baking dish.
- The remaining powder is your smokeable DMT.
All you have to worry about when you make your own DMT is how efficient you’ve been in following the instructions. If you’ve used poor quality ingredients, or done a messy job (i.e. carried over some of the base solution by accident), you may end up with more impurities in your DMT powder. This can be unpleasant to smoke.
There’s a myth that the colour of DMT powder tells you its purity – this isn’t true, as there are a number of factors that contribute to the colour of DMT powder. Generally, if your powder is white, yellow, red or brown, it is safe to smoke. If it is green or blue, something has gone wrong in your extraction and you should try again.
Alternative extraction guides
As mentioned earlier, many extraction protocols use an acid/base extraction method, which we haven’t covered here as the straight-to-base method is a lot simpler. However, if you are interested in being extremely thorough and want to try an acid/base extraction, there is a large selection of guides here on the DMT-nexus.
Safety information
DMT is illegal in most places. I don’t condone breaking the law or using DMT outside a legal and traditional context. If you do decide to take DMT, make sure you research its effects and risks.
DMT is a very powerful psychedelic and should be treated with respect. You should understand how best to prepare for a psychedelic experience, and integrate it afterwards.
Be aware of your dosage! A recommended first-time dose of smoked DMT powder is 15mg.
When following these extraction guides, make sure to understand the process before you start. If you are using a DMT-containing plant other than Mimosa hostilis, make sure you are aware of the differences and adjust your procedure accordingly. Always wear rubber gloves and safety goggles, and a dust mask if you are grinding up plant matter.
If using lye (sodium hydroxide), avoid getting it on your skin, and always wear safety goggles. If you get it on your skin, wash it off with copious amounts of water (and ideally use vinegar too, if it’s within reach, to neutralise the lye). If you get it in your eye, run your eye under tap water for at least 20 minutes and see a doctor. If you spill a large amount, neutralise it with vinegar before cleaning it up. When adding lye to water, add it slowly and mix well.
EDIT: This will also help you stop binge watching gay porn and it will remove other vices from your life.
...
That is a vague, shytty response. You're gonna have to do better than that doggy
It's funny because I knew you'd react that way but I figured we could build more on the actual topic because of it.
You asked me what I was doing, not only was it the truth but it was purposely vague, because the 'force' is vague, simple and light in nature.
Look at the thread's title. You ever hear the expression "the devil is in the details"? That is to say, the human intellect while fascinating is ultimately a destructive force in nature. It separates and "breaks down" things that are whole for the sake of complexity. (fruit of the tree knowledge, ignorance is bliss ect.)
I could have said take this substance, do this technique to open up this door way but I have had bad experiences with showing people certain shyt that they weren't ready for (pearls before swine) because at the time I myself was experiencing things well before I had any understanding as to why some knowledge is 'occult'. Trying to jump into these waters without head and heart coherence is how souls get 'sold', you can't stabilize or truly embody the force without the wisdom of the heart.
This Squirrel Dude Is Slipping Deep Into Depression Before Our Eyes Brehs
ThrobbingHood
“I’m Sorry for 2025”
If you could sell your soul to the devil, no one would be poor and Madonna would be able to sing. Think about it.
ThrobbingHood
“I’m Sorry for 2025”
ThrobbingHood
“I’m Sorry for 2025”
