WaveWhisperer
Stainless Steel
you put a cam in that bytch yet?In my chevy SS I can just lift the hood and take an fillips screw driver to replace the bulbs
. Car is clean though.
And did you get the manual?
What Did You Do To Your Car Today
- Thread starter King Sun
- Start date
And did you get the manual?
No plans for cam yet
no its a 2014 and im glad that I want with the auto. Its just too smooth for a daily.
WaveWhisperer
Stainless Steel
Update on the sway bar project. Got all the bushings last week but i didnt think howni was gonna remove the old bushings for the control arms i need to install for the rear sway bar
Didnt have a press and me and a worker fought one of the bushings for a solid hour with a balljoint press a blow torch and pry bar.
Didnt work ss i went home and bought a blow torch myself and cooked them shyts out myself. Only thing now is to get the shells out
Didnt have a press and me and a worker fought one of the bushings for a solid hour with a balljoint press a blow torch and pry bar.
Didnt work ss i went home and bought a blow torch myself and cooked them shyts out myself. Only thing now is to get the shells out
I did just put a kicker comp q 12 in a ported box. This is probably the loudest system I've owned but I want to change the mids and highs 
Bout to jump on this detail after a cup of coffee
Got some spacers for my wheels coming tomorrow
That should be it for the exterior
Next week I’m hoping to get some rack time at my folk’s shop and replace my upper oil pan gasket which has a minor leak. Unfortunately the subframe needs to be dropped in order to get to it
Got some spacers for my wheels coming tomorrow
That should be it for the exterior
Next week I’m hoping to get some rack time at my folk’s shop and replace my upper oil pan gasket which has a minor leak. Unfortunately the subframe needs to be dropped in order to get to it
SPACE IS FAKE
Say No To NASA!
which ones u picked up?
I got a bottle of their Headlight Restore & Protect and a bottle of their Jetseal.
Wet sanded them using a bucket of water, a sponge, and a couple sheets of 2500 grit sandpaper. I then used a power drill with some buffer attachments for the restore product, though you could probably get away with doing it by hand. I then used a microfiber pad to apply the jetseal to protect them from clouding over again. Hopefully it's good enough to only have to apply once or twice a year from now on.
Spent 9 hours detailing my exterior today. I highly recommend the meguire's ultimate compound that I used, as it got rid of some moderate oxidation in my paint and really brought the sparkles back out in the finish. Did it by hand too, wasn't sure if it would was going to necessitate a buffer before starting the job, but it came out great.
Took off all my rims and detailed them inside and out using a claybar, polish, and wax today and then installed my new spacers.
I forgot to mention that you may not need to wet sand them with paper depending on their condition. The compound in their restore solution works pretty well on it's own. Do add a separate sealant like the Jetseal I recommended afterwards though. Otherwise it'll just cloud up again in a couple months most likely.
I forgot to mention that you may not need to wet sand them with paper depending on their condition. The compound in their restore solution works pretty well on it's own. Do add a separate sealant like the Jetseal I recommended afterwards though. Otherwise it'll just cloud up again in a couple months most likely.
Last edited:
SPACE IS FAKE
Say No To NASA!
I found something on Groupon for the low so I said fukk all that I’ll let the pros do it
It's really easy, shouldn't take more than twenty minutes unless they're totally destroyed . You may as well try it out with all this time off lol. You'll be glad you know how to do it and still have plenty of solution left when they inevitably yellow again.
Up a picture of the worst one
WaveWhisperer
Stainless Steel
Got the shells out and got the new ones pressed in so i slapped rear sway bar on yesterday.
Gonna see what's good with the front tomorrow. Think i ordered the wrong size bushings for the front so I might have to return em. Aint trippin though
Gonna see what's good with the front tomorrow. Think i ordered the wrong size bushings for the front so I might have to return em. Aint trippin though
Replacing my upper oil pan gasket right now. Had to hoist the engine and drop the sub frame to get to it. Doing the motor mounts too. Wasn't even that bad of a leak. I don't know why I do this to myself 
Got to use my friend's parts washer to clean the pans though
Got a late start today, so I'm gonna put it all back together tomorrow.
Got to use my friend's parts washer to clean the pans though
Got a late start today, so I'm gonna put it all back together tomorrow.
Last edited:
Replaced my sway bar bushings and auto-leveling headlight sensor which broke when I did my control arms a couple weeks back. At this point I've replaced all the major engine gaskets and rebuilt the entire front end suspension. I think my car is at 100% now.
